Introduction: A method to prevent the penetration of penetrating water and condensate  water by installing PVC sheets on the floor of the basement and on the wall.

Application area: Basement floor, wall

Introduction: The method of injecting urethane or foam epoxy into the cracks to fill the void to prevent the effect of water resistance.

Area of application: The whole crack of concrete

Introduction: a method of mixing a polymer emulsion with an inorganic powder and then scanning on a substrate to form a waterproof layer.

Areas of application: outside walls, basement, small house, cleaning, balcony..vv.

Giới thiệu: Là phương pháp tạo thành một lớp chống thấm bằng cách phủ các tấm  làm sẵn lên bề mặt sau khi sơn lớp lót thông qua biện pháp liên kết nhiệt hoặc tương tự

Khu vực ứng dụng: tường bên ngoài tầng hầm, mái nhà, vv.

Introduction: The method uses a 2-component polyurethane resin paint that has excellent impact and crack resistance. In addition, this material does not create a crack when Finishing should be able to prevent water leakage well.

Introduction: The method uses a two-component polyurethane resin paint. The product does not contain tar components of existing non-contact waterproofing materials, so it has excellent impact and crack resistance. In addition, this material does not create a crack when Finishing so it can prevent water leakage well.

Introduction: The method uses Sillica sand and activated chemical additives, reacts with water or moisture to form crystal crystals to enhance the density of concrete. Application areas: Basement floor, wall, water tank, septic tank, Cleaning house, balcony, v.v ..

Introduction: It is a method of using a waterproofing agent before applying concrete to protect the concrete structure from the penetration of moisture and water. Application Areas: Basement, Wall, Water Tank, Septic Tank, Cleaning House, Balcony, v.v ..

Introduction: A method of forming a waterproofing layer by applying a liquid material to the surface

Introduction: A method of creating a waterproofing layer using a fiberglass nonwoven fabric as a reinforcement material and using tools such as a trowel, sweep, and brush to sweep a plastic covering of two components is the main material and hardener